Isaz Afghan Block Crochet Pattern

Discover the captivating artistry of the Isaz Afghan Block crochet pattern. This exquisite design showcases the intricate beauty of crochet, allowing you to create a stunning piece that will surely become a cherished heirloom. With its unique combination of stitches and textures, the Isaz Afghan Block offers a delightful challenge for crochet enthusiasts of all skill levels.

Whether you're a seasoned crocheter or just starting out, the Isaz Afghan Block will captivate your imagination and provide a rewarding experience as you witness each stitch come to life. Let your creativity soar as you embark on this crochet journey, and watch in awe as the Isaz Afghan Block unfolds into a masterpiece that will be treasured for years to come.

Materials

Yarn: 10ply / yarn weight #4 (Worsted), Scheepjes Stone Washed XL used in photographs.

• Crystal Quartz (854) YARN A
• Green Agate (855) YARN B
• Blue Apatite (845) YARN C

Pattern will work in other hooks and yarns though finished size will be different.

Hook: US size H/8 (5 mm)

You will also need:

• Scissors
• A yarn needle

Gauge: 4dc = 3inch / 7.6cm

Obtaining the correct gauge is not critical to this project but if your gauge does not match then your finished item will be a different size.

Finished Size: 8 x 8 inches (20.3 x 20.3cm)

Stitch Guidance

• Slip Stitch (sl st): Insert hook in stitch indicated, yarn over and draw through all loops.
• Double Crochet (dc): Insert hook in stitch indicated and pull up a loop (two loops on hook), yarn over, pull through both loops on hook.
• Half Treble Crochet (htr): Yarn over, insert hook in indicated stitch and pull up a loop (three loops on hook), yarn over, pull through all three loops on hook.
• Treble (tr): Yarn over, insert hook in indicated stitch and pull up a loop (three loops on hook), yarn over, pull through two loops, yarn over, pull through remaining two loops on hook.
• Back Post Treble (BPtr): Yarn over, insert hook from back to front to back around post of indicated stitch below, yarn over and pull up a loop, yarn over followed by pulling through two loops on hook (two loops on hook), yarn over, pull through remaining loops on hook.
• [ ... ] Repeat section in square brackets until specified.
• ( ... ) Repeat section in curved brackets into one stitch or space.

Pattern Notes

• The ch1 at the start of a round does not count as a stitch.
• The ch2 at the start of a round counts as a half treble stitch.
• The ch3 at the start of a round counts as a treble stitch.

Pattern

Rnd 1: With Yarn A, ch4 and sl st to form a ring, ch3, work 2 tr into the ring, ch3, [3tr, ch3] repeat from [ ... ] twice more, sl st to the top of the beginning ch3 to join. Fasten off A and weave in ends. 12sts / 4 x ch3-sps

Rnd 2: Join Yarn B with a sl st to any ch3-sp; ch1, [(1dc, ch3, 1dc) in the same space, ch3, miss 3 stitches] repeat from [ ... ] three times, sl st to the top of the beginning ch to join. 8sts / 8 x ch3-sps

Rnd 3: Sl st to the next ch3-sp; ch6 (counts as first tr + ch3), 3tr in the same space, [ch2, 1dc in the next ch3-sp, ch2, (3tr, ch3, 3tr) in the next ch3-sp] repeat twice more, ch2, 1dc in the next ch3-sp, ch2, 2tr in the ch3-sp, sl st to the 3rd ch of the beginning ch6 to join. Fasten off B and weave in ends, 28sts / 8 x ch2-sps, 4 x ch3-sps.

Rnd 4: Join Yarn C with a sl st to any ch3-sp; ch6, 1tr in the same space, [BPtr in the next 3 stitches, miss 2ch, 3tr in the dc of rnd 3, miss 2ch, BPtr in the next 3 stitches, (1tr, ch3, 1tr) in the next ch3-sp, repeat [ ... ] twice, BPtr in the next 3 stitches, miss 2ch, 3tr in the dc of rnd 3, miss 2ch, BPtr in the next 3 stitches, sl st to the 3rd ch of the beginning ch6 to join. Fasten off C and weave in ends, 44sts / 4 x ch3-sps.

Rnd 5: Join Yarn A with a sl st to any ch3-sp; ch5 (counts as first htr + ch3), 1htr in the same space, 1htr in 4 stitches, BPtr in 3 stitches, 1htr in 4 stitches, (1htr, ch3, 1htr) repeat [ ... ] twice, 1htr in 4 stitches, BPtr in 3 stitches, 1htr in 4 stitches, sl st to the top of the 2nd ch of the beginning 5ch. Fasten off C and weave in ends, 52sts / 4 x ch3-sps.

Rnd 6: Join Yarn B with a sl st to any ch3-sp; ch6, 3tr in the same space, [ch2, miss 2 stitches, 1dc in the next stitch, miss 2 stitches, ch2, 1tr in the next 3 stitches, ch2, miss 2 stitches, 1dc in the next stitch, miss 2 stitches, ch2, (3tr, ch3, 3tr)] repeat [ ... ] twice, ch2, miss 2 stitches, 1dc in the next stitch, miss 2 stitches, ch2, 1tr in the next 3 stitches, ch2, miss 2 stitches, 1dc in the next stitch, miss 2 stitches, ch2, 2tr in the ch3-sp, sl st to the 3rd ch of the beginning ch6 to join. Fasten off B and weave in ends, 44sts / 16 x ch2-sps, 4 x ch3-sps.

Rnd 7: Join Yarn C with a sl st to any ch3-sp; ch6, 1tr in the same space, [BPtr in the next 3 stitches, 3tr in the dc of the previous round, BPtr in the next 3 stitches, 3tr in the dc of the previous round, BPtr in the next 3 stitches, (1tr, ch3, 1tr) in the next ch-sp] repeat [ ... ] twice, BPtr in the next 3 stitches, BPtr in the next 3 stitches, 3tr in the dc of the previous round, BPtr in the next 3 stitches, 3tr in the dc of the previous round, BPtr in the next 3 stitches. Fasten off C and weave in ends, 68sts / 4 x ch3-sps.

Rnd 8: With Yarn A; ch5, 1htr in the same ch-sp, 1htr in 4 stitches, BPtr in 3 stitches, 1htr in 3 stitches, BPtr in 3 stitches, 1htr in 4 stitches, (1htr, ch3, 1htr) repeat [ ... ] twice, 1htr in 4 stitches, BPtr in 3 stitches, 1htr in 3 stitches, BPtr in 3 stitches, 1htr in 4 stitches. Sl st to the 2nd ch of the beginning 5ch to join. Fasten off A and weave in ends, 76sts / 4 x ch3-sps.

Rnd 9: Yarn C with a sl st to any ch3-sp; ch6, 2tr in the same space, [1tr in 8 stitches, BPtr in 3 stitches, 1tr in 8 stitches, (2tr, ch3, 2tr)] repeat [ ... ] three times, 1tr in 8 stitches, BPtr in 3 stitches, 1tr in 8 stitches. 1tr in the ch3-sp, sl st to the 3rd ch of the beginning ch6 to join. Fasten off C and weave in ends, 92sts / 4 x ch3-sps.

And that’s it!

Blocking

Your square may benefit from being blocked;

1. Completely soak your item in cold water then gently squeeze (without wringing it) out some of the excess water.
2. Using your tape measure and pins, carefully pin your item on your blocking board.
3. Double check your measurements if necessary (i.e. check the height and width are correct).
4. Leave to dry completely over 24 hours and then unpin.