Start new topic Forum Latest digest Sign in Create account
Search
CrochetMenScarvesHatsGlovesSweatersCardigansSocksOther clothingWomenScarvesHatsGlovesShawls and cover upSweatersCardigansSocksSlippersBagsOther clothingChildrenScarvesHatsGlovesSweatersCardigansSocksSlippersOther clothingHomeBlankets and plaidsRugsHome decorationsPetsSchemesKnittingOther hand-madeChat

Helping our users. Crochet Piggy Slippers.

Susan
Susan
Oct 23, 2020 10:25 PM
Helping our users. Crochet Piggy Slippers.

You’ll need:

100g of DROPS PARIS Yarn in light pink color (# 20);

50g of the same yarn, but in shocking pink color (# 06);

Odds of black yarn;


Size: 6½/8 -9/10½ -11/13 -13½ -5/6½

To fit foot length: 15-17-18-20-22 cm / 6"-6 3/4"-7''-8''-8¾''


Special Stitches

Magic circle: When piece is worked in the round, start with this technique to avoid holes in the middle (instead of ch-ring): Hold the yarn end and wind the yarn one time around the index finger to make a loop. Hold the loop with left thumb and middle finger, place the thread over left index finger. Insert hook through the loop, make a YO and pull thread through loop, work ch 1, then work sc around the loop. When the desired no of sc have been reached, pull the yarn end to tighten the loop. Fasten the yarn end at the back.

Rounds with sc: Beg every sc round with ch 1, finish with 1 sl st in 1st sc.

Increase Tip

Inc 1 sc by working 2 sc in next sc.

Sc-row: Beg every sc-row with 1 ch (not counted as 1st sc), 1 sc in every sc the entire row, turn.

Decrease Tip

Dec 1 sc by working 2 sc tog as follows: * Insert hook in next sc, get thread *, repeat from *-* one more time, make a YO and pull thread through all 3 sts on hook.

Work in the round in the circle: After last sc on the round, continue to next round with 1 sc in next sc (= first sc from previous round).

Note

Insert a marker at the beg of round between last sc and first sc on the round, move the marker upwards when working.

Instructions

Worked first in the round and then back and forth. Start by making a magic circle at the edge of toe with light pink on hook size 4.5 mm/ US 7.

ROUND 1: Work 7-7-7-8-8 sc in the magic circle, finish with 1 sl st in 1st sc. Then work rounds with sc.

ROUND 2: Inc 1 sc in every sc = 14-14-14-16-16 sc.

ROUND 3: Work 1 sc in every sc – at the same time inc 4-6-8-8-8 sts evenly on round = 18-20-22-24-24 sc.

ROUND 4: Work 1 sc in every sc.

ROUND 5: Work 1 sc in every sc – at the same time inc 8 sts evenly on round = 26-28-30-32-32 sc.

ROUND 6: Work 1 sc in every sc.

ROUND 7: Work 1 sc in every sc – at the same time inc 4 sts evenly on round = 30-32-34-36-36 sc.

Then work 1 sc in every sc until piece measures approx. 7½-8½-9-10-11 cm / 2 7/8"-3 1/4"-3½"-4"-4 3/8". When the last sc on round has been worked, do not work sl st in 1st sc but continue with 1 sc in each of the next 10-10-11-12-12 sc (= 1st row from RS), turn piece and work 1 sc in each of the next 20-20-22-24-24 sc from WS (= 10-12-12-12-12 sc remain mid front of slipper, now beg of round from earlier is under the sole). Then work sc-row - back and forth with 20-20-22-24-24 sc on every row. When piece measures approx. 14½-16½-17½-19½-21½ cm / 5 3/4"-6½"-6 7/8"-7 3/4"-8½" work next row from RS as follows:

ROW 1: Work 6-6-7-8-8 sc, dec 2 sc over the next 4 sc = 8-8-9-10-10 sc, turn (10-10-11-12-12 sc remain on other side of row).

ROW 2: Dec 2 sc over the first 4 sc, 1 sc in every sc the entire row = 6-6-7-8-8 sc, turn.

ROW 3: Work 2-2-3-4-4 sc, dec 2 sc over the last 4 sc = 4-4-5-6-6 sc.

ROW 4: Dec 1-1-1-2-2 sc over the first 2-2-2-4-4 sc, 1 sc in every sc the entire row = 3-3-4-4-4 sc, cut and fasten the thread.

Work over the remaining 10-10-11-12-12 sc on the other side as follows:

ROW 1: Dec 2 sc over the first 4 sc, 1 sc in every sc the entire row = 8-8-9-10-10 sc, turn.

ROW 2: Work 4-4-5-6-6 sc, dec 2 sc over the last 4 sc = 6-6-7-8-8 sc, turn.

ROW 3: Dec 2 sc over the first 4 sc, 1 sc in every sc the entire row = 4-4-5-6-6 sc.

ROW 4: Dec 1-1-1-2-2 sc over the last 2-2-2-4-4 sc = 3-3-4-4-4 sc, cut and fasten the thread.

Sew seam mid back of slipper.

Start mid back on slipper, crochet from RS one round with sc around the entire opening. Over the rows in the sides work as follows: Work 1 sc in every row along the sides, and 1 sc in every sc at the front of slipper - in 1st corner at the front work as follows: * Insert hook in the last sc from rows, get the thread, pull hook in the 1st sc from front part of slipper, get the thread, make 1 YO and pull thread through all 3 sts on hook *. Repeat from *-* in 2nd corner at the front but reversed. Finish round with 1 sl st in 1st sc. Then work 1 round with sc, cut and fasten the thread.

Ears

Worked in the round in a circle. Start by making a MAGIC CIRCLE with shocking pink on hook size 4.5 mm/ US 7.

ROUND 1: Work 4 sc in the magic circle - NOTE: Do not work sl st in 1st sc.

ROUND 2: Inc 1 sc in every sc = 8 sc.

ROUND 3: * 1 sc in next sc, inc 1 sc in next sc *, repeat from *-* the entire round = 12 sc.

ROUND 4-5: Work 1 sc in every sc, cut and fasten the thread. Work another ear the same way.


Snoute

Worked in the round in a circle. Start by making a MAGIC CIRCLE with shocking pink on hook size 4.5 mm/ US 7.

ROUND 1: Work 6 sc in the magic circle.

ROUND 2: Inc 1 sc in every sc = 12 sc.

ROUND 3-5: Work 1 sc in every sc, cut and fasten the thread.


Tail

Ch 9 with shocking pink, then work 1 sl st in 2nd ch from hook, * ch 1, 1 sl st in next ch *, repeat from *-*, finish with 1 sl st in the last ch, cut and fasten the thread.


Assembly

Place the ears flat and sew them to each side of slipper. Embroider eyes with black, sew snout and tail on to the slipper.

Like!5
1189
No comments