⭐️ My Favorites Sign in
Search
Skip to forum content

Crochet Sweet Bird

Started Jul 31, 2021 · A conversation in Patterns & Ideas

Photo shared by a community member SWEET BIRD AMIGURUMI US TERMINOLOGY ch – chain dec – single crochet decrease hdc – half double crochet inc – single crochet increase inv dec – invisible decrease rnd(s) – round(s) sc – single crochet sl st – slip stitch st(s) – stitch(es) 3-dc pc st – 3 double crochet popcorn stitch [ ] – Repeat steps between brackets for the specified number of times ( ) – The number of stitches you should have at the end of each round SPECIAL TECHNIQUES • 3-dc popcorn stitch – See photo tutorial below. • Changing color – Take the last yarn over of previous stitch with new color. Continue working with new color. • Embroidering on crochet – See tutorial here (https://www.tinycurl.co/amigurumi-face-embroidery-tutorial/). • Finish off – Watch tutorial here (https://www.youtube.com/watch?v=Azi-rFPHTUU&t=1s). • Invisible decrease – Watch tutorial here (https://www.tinycurl.co/invisible-increase-and-invisible-decrease-crochet-techniques/). • Magic ring – Watch tutorial here (https://www.youtube.com/watch?v=J2Gt-gv9YLs). • Standing sc – Start with a slipknot on your hook. Insert hook into stitch and make a single crochet as normal. See tutorial here (https://lookatwhatimade.net/crafts/yarn/crochet/crochet-tutorials/crochet-standing-single-crochet/). NOTES • All sections are worked in a continuous round, except wings which are worked in rows. • Mark the beginning of each round with a stitch marker. • All stitches are written in US terminology. • Demonstration photos are shown using right-handed crochet. 3-DOUBLE CROCHET POPCORN STITCH Photo no longer available in the original discussion. 1. Make 3 dcs into stitch. Drop loop of last dc from hook, leaving it open above stitch. Photo no longer available in the original discussion. 2. Insert hook through top of first dc. Photo no longer available in the original discussion. 3. Place dropped loop on hook. Photo no longer available in the original discussion. 4. Bring loop through first dc. Photo no longer available in the original discussion. 5. Ch 1. Photo no longer available in the original discussion. 6. Fold popcorn stitch towards you when doing your next st so the popcorn stays on the outside of your bird and to ensure a tight stitch. Photo no longer available in the original discussion. 7. In the following round, make sure to sc in the ch st under each popcorn st. BEAK rnd 1: In color C, ch 6, sc 3 in 2nd ch from hook, sc 3 down chain, sc 3 in last ch, turn to crochet down other side of chain (and over yarn tail to avoid weaving), sc 3 down chain (12 sts) Sl st 1 into next st. Fasten off, leaving a 15-inch tail for attaching. Weave in and cut beginning yarn tail. Set aside until after head is made. HEAD rnd 1: In color A (leave a 15-inch starting yarn tail outside of the top of head for head feathers), start with a magic ring, sc 6 into ring (6 sts) rnd 2: Inc 6 (12 sts) rnd 3: [sc 1, inc 1] 6 times (18 sts) rnd 4: [sc 1, inc 1, sc 1] 6 times (24 sts) rnd 5: [sc 3, inc 1] 6 times (30 sts) rnd 6: Sc around (30 sts) rnd 7: [sc 2, inc 1, sc 2] 6 times (36 sts) rnd 8: [sc 5, inc 1] 6 times (42 sts) rnd 9: [sc 3, inc 1, sc 3] 6 times (48 sts) rnds 10-18: Sc around (48 sts for 9 rnds) rnd 19: [sc 6, inv dec 1] 6 times (42 sts)rnd 20: [sc 5, inv dec 1] 6 times (36 sts) Fasten off yarn and weave in ending yarn tail. Attach beak, embroider face, and make head feathers now using the photo tutorials below. Click here to jump to the Shirt & Body section. ATTACHING THE BEAK & EMBROIDERING FACE We’ll now be attaching the beak and embroidering Sweet Bird’s face. The key to embroidering on crochet is to make sure to insert your needle through your stitches and not in a hole between stitches so your thread remains secure. First we’ll attach the beak in steps 1-5 and embroider in steps 6-12.Check out this blog post for more tips on embroidering on crochet! (https://www.tinycurl.co/amigurumi-face-embroidery-tutorial/) Photo no longer available in the original discussion. 1. Thread tapestry needle and bring yarn to the center of oval. Photo no longer available in the original discussion. 2. Stitch inner sides of oval together (1 stitch per side). Photo no longer available in the original discussion. 3. This is what your finished beak should look like. Keep your tapestry needle threaded to attach to head. Photo no longer available in the original discussion. 4. Insert threaded tapestry needle through top of beak. Photo no longer available in the original discussion. 5. On side opposite st marker, thread under st on rnd 15. Repeat steps 4 & 5 across beak. Double knot yarn inside head. Photo no longer available in the original discussion. 6. With 16-in of embroidery floss (all 6 strands), thread embroidery needle & knot end. Bring through st near beak on rnd 14. Photo no longer available in the original discussion. 7 . Make a small stitch up to the next rnd. Photo no longer available in the original discussion. 8. Bring up thread above last stitch. Photo no longer available in the original discussion. 9. Make a stitch connecting to previous stitch. Repeat steps 8 & 9 seven more times along eye. Photo no longer available in the original discussion. 10. To make the lashes bring needle up near end of eye line. Photo no longer available in the original discussion. 11. Connect to eye line. It’s easiest to insert your needle into a previous stitch hole. Photo no longer available in the original discussion. 12. Make lashes along eye & mirror steps 6-12 for left eye. Optional: apply pink blush to bird’s cheeks using a small brush. MAKING THE HEAD FEATHERS Photo no longer available in the original discussion. 1. Thread tapestry needle with yarn tail. Bring yarn through center of head. Photo no longer available in the original discussion. 2. Leave a small loop of yarn on the top of the head. Photo no longer available in the original discussion. 3. Knot through a st in head to secure loop. Bring needle back through top of head. Repeat steps 1-3 twice more to create 3 loops on head. SHIRT & BODY rnd 1: Using color B, attach yarn to last rnd of head using a standing sc. Sc 4, inc 1, [sc 5, inc 1] 5 times (42 sts) rnd 2: [sc 3, inc 1, sc 3] 6 times (48 sts) rnd 3: [sc 7, inc 1] 6 times (54 sts) rnd 4: [sc 4, 3-dc pc st, sc 3, inc 1] 6 times (60 sts) rnds 5-6: Sc around (60 sts for 2 rnds) rnd 7: [sc 9, 3-dc pc st] 6 times (60 sts) rnds 8-9: Sc around (60 sts for 2 rnds) rnd 10: [sc 4, 3-dc pc st, sc 5] 6 times (60 sts) rnd 11: Sc around (60 sts) rnd 12: Change to color A, sc around (60 sts) rnd 13: [sc 8, inv dec 1] 6 times (54 sts) rnd 14: [sc 7, inv dec 1] 6 times (48 sts) rnd 15: [sc 6, inv dec 1] 6 times (42 sts) rnd 16: Sc around (42 sts) rnd 17: [sc 5, inv dec 1] 6 times (36 sts) rnd 18: [sc 4, inv dec 1] 6 times (30 sts) • •• START STUFFING BODY AND CONTINUE STUFFING FIRMLY UNTIL CLOSED. ••• rnd 19: [sc 3, inv dec 1] 6 times (24 sts) rnd 20: [sc 2, inv dec 1] 6 times (18 sts) rnd 21: [sc 1, inv dec 1] 6 times (12 sts) rnd 22: inv dec 6 (6 sts) Sl st 1 into next st. Fasten off and finish off. WING (MAKE 2) Made in rows. Leave a 10-inch starting yarn tail for attaching. Use normal decreases, not invisible decreases. row 1: Using color A, ch 7, sc 6 starting in 2nd ch from hook (6 sts) row 2: Ch 1, turn, inc 1, sc 4, inc 1 (8 sts) rows 3-5: Ch 1, turn, sc across (8 sts for 3 rows) row 6: Ch 1, turn, dec 1, sc 4, dec 1 (6 sts) row 7: Ch 1, turn, sc across (6 sts) row 8: Ch 1, turn, dec 1, sc 2, dec 1 (4 sts) row 9: Ch 1, turn, sc across (4 sts) row 10: Ch 1, turn, dec 2 (2 sts) row 11: Ch 1, turn, sc across (2 sts) row 12: Ch 1, turn, dec 1 (1 st) Fasten off and weave in ending yarn tail. Attach to body using tutorial below. LEG (MAKE 2) rnd 1: With color C, start with a magic ring, sc 6 into ring (6 sts) rnds 2-15: Sc around (6 sts for 14 rnds) Fasten off, leaving a 10-inch tail for attaching. Don’t stuff. Weave in remainder of beginning yarn tail. Set aside until after making foot. FOOT (MAKE 2) Leave a 10-inch beginning yarn tail for attaching. See foot reference photo below. rnd 1: Start with a magic ring, sc 7 into ring (7 sts) rnd 2: Sl st 1 into next st, [ch 3, sc 1 into 2nd ch from hook, hdc 1 into next ch, sl st 1 into next st of round 1] 3 times (3 toes made) Fasten off and weave in end yarn tail. Photo no longer available in the original discussion. FOOT REFERENCE PHOTO ATTACHING WINGS Photo no longer available in the original discussion. 1. Insert tapestry needle into wing to hide knot. Photo no longer available in the original discussion. 2. Insert tapestry needle into a st of rnd 2 of shirt/body. Photo no longer available in the original discussion. 3. Insert needle from front to back through st on wing. Repeat steps 2 & 3 until you’ve securely connected wing. Weave yarn tail through several stitches to secure. ATTACHING FOOT TO LEG Photo no longer available in the original discussion. 1. Using tapestry needle, bring yarn through center of foot. Photo no longer available in the original discussion. 2. Insert needle through center of leg and out through side. Photo no longer available in the original discussion. 3. Align closed end of leg at the center of foot (the magic ring’s center). Insert needle through foot near center. Photo no longer available in the original discussion. 4. Bring needle through center hole of foot, through center of leg, and out side of leg. Repeat steps 3 & 4 until the foot is secure. Photo no longer available in the original discussion. 5. Weave yarn through leg to secure. Cut excess yarn. ATTACHING LEG TO BODY Photo no longer available in the original discussion. 1. Attach leg over rnds 16 & 17 of body. Photo no longer available in the original discussion. 2. Insert needle through st on round 17 of body. Photo no longer available in the original discussion. 3. Insert needle through next st of leg. Repeat steps 2 & 3 on rounds 17 & 16 until you’ve secured the leg to 3 stitches on each round. Weave yarn through several sts to secure. Cut excess yarn.